Home    Prev Next    
RapidDriver Explorer
The User Interface (Overview)
Device Description
Test Devices
Driver Description
New RapidDriver Project
Step 1: Select Device
Step 2: Project Description
Step 3: ISA Resources
Step 4: Driver Installation
Generic RapidDriver Project
Port I/O
Memory-mapped I/O
PCI Devices
Working With ISA/PC-104 Devices
New ISA/PC-104 Project
Hardware Resources for ISA/PC-104
Input/Output (I/O) Port Ranges
Memory Address Ranges
Interrupt Request (IRQ) Line
Direct Memory Access (DMA) Channel
Test ISA/PC-104 Device
Working With PCI Devices
New PCI Driver Project
Test PCI Device
PCI Header
Configuration Space
Base Address Registers (BARs)
Settings for bus-master DMA
Working with Parallel Port Devices
New Parallel Port Project
Test Parallel Port Device
Parallel Port Settings
LPT Pins
Ports And Bits
Working With USB Devices
New USB Project
Test USB Device
Descriptors and Configuration
Vendor/Class Requests
Pipe Operations
Feature Requests
Step 1: Select Device
Go to RapidDriver Main Page

At this step you must choose a project type and/or device from the list:


You will then be given the opportunity to specify the project type as follows:

·Create new "generic" project  
·Create new project for a legacy ISA/PC-104 device  
·Create new project for a Parallel Port device  
·Create new project for a PCI device (click on '+' to expand the PCI devices branch then select a device from the list)  
·Create new project for an USB device (click on '+' to expand the USB devices branch then select a device from the list)